Honda Lug Nut Torque Specs

Properly tightened lug nuts are essential for the safety and longevity of your Honda vehicle. Incorrect torque can lead to loose wheels, stripped threads, or even warped brake rotors. In this guide, we'll delve into the importance of lug nut torque, provide accurate specifications for various Honda models, and guide you through the proper tightening process.

Why Lug Nut Torque Matters

Lug nut torque, measured in foot-pounds (ft-lbs) or Newton-meters (Nm), refers to the specific amount of force applied to the lug nuts when tightening them. It's a crucial aspect of wheel maintenance that ensures:

• Wheel Security: Properly torqued lug nuts keep your wheels securely attached to your Honda, preventing them from loosening or detaching while driving.

• Even Wear: Correct torque ensures that the wheels are evenly seated against the hub, promoting even tire wear and preventing premature wear of brake components.

• Stud Integrity: Overtightening can damage the wheel studs, leading to costly repairs.

Honda Lug Nut Torque Specs

The recommended lug nut torque for most Honda vehicles is 80 ft-lbs (108 Nm). However, it's crucial to consult your owner's manual to confirm the exact specification for your model and year, as there might be slight variations.

Here's an updated guideline for Honda lug nut torque specs:

• Most Honda cars (e.g., Civic, Accord, Fit): 80 ft-lbs (108 Nm)

• Honda CR-V, HR-V: 80 ft-lbs (108 Nm)

• Honda Odyssey, Pilot, Passport, Ridgeline: 94 ft-lbs (127 Nm)

How to Properly Tighten Lug Nuts

1. Hand-Tighten: Start by hand-tightening the lug nuts in a star or crisscross pattern to ensure even seating.

2. Use a Torque Wrench: Set your torque wrench to the correct specification for your Honda model.

3. Tighten Gradually: Tighten each lug nut in the same pattern you used for hand-tightening, gradually increasing the torque until the wrench clicks.

4. Recheck: After driving for about 50 miles, recheck the lug nut torque to ensure they haven't loosened.

Important Considerations:

• Don't Overtighten: Overtightening lug nuts is a common mistake that can damage wheel studs and brake rotors. Always use a torque wrench to apply the correct amount of force.

• Clean Threads: Make sure the threads on the wheel studs and lug nuts are clean and free of debris before tightening.

• Professional Assistance: If you're unsure about any aspect of the process, consult a qualified mechanic.

Sources for Accurate Information:

• Owner's Manual: Your Honda owner's manual is the most reliable source for the correct lug nut torque specs for your specific model and year.

• Online Resources: Reputable automotive websites and forums can provide additional information and torque charts. Double-check the information with your owner's manual or a Honda mechanic.

• Honda Dealerships and Service Centers: They can confirm the correct torque specs and offer professional assistance if needed.

By following these guidelines and using the correct torque specs, you can ensure your Honda's wheels are safely and securely attached, providing you with peace of mind and a smooth driving experience.

Remember: Safety always comes first. If you're unsure about anything, don't hesitate to seek professional help from a qualified mechanic.

Honda Lug Nut Torque Specs, All Models.

Make	Model	Trim	Year Range	Torque
HONDA	ACCORD - ALL	ALL / ALL	1982 - 2019	80 ft-lbs
	CIVIC - ALL	ALL / LX	1984 - 2019	80 ft-lbs
	CLARITY	ALL	2019	80 ft-lbs
	CROSSTOUR	17"BASE / EX	2010 - 2015	80 ft-lbs
	CR-V	ALL / ALL	1997 - 2019	80 ft-lbs
	CRX	ALL / HF	1984 - 1991	80 ft-lbs
	CR-Z	16"BASE / ALL	2011 - 2016	80 ft-lbs
	DEL SOL	ALL / S	1993 - 1997	80 ft-lbs
	ELEMENT	2WD / DX/EX	2003 - 2011	80 ft-lbs
	EV PLUS	ALL / HATCHBACK	1997 - 1999	80 ft-lbs
	FIT	14-INCH / BASE	2007 - 2019	80 ft-lbs
	HR-V	17"BASE / LX/EX/EX-L	2016 - 2019	80 ft-lbs
	INSIGHT	ALL / ALL	2000 - 2019	80 ft-lbs
	ODYSSEY	ALL / LX/EX	1995 - 2004	80 ft-lbs
	ODYSSEY	PAX / TOURING	2005 - 2019	95 ft-lbs
	PASSPORT	2WD / P215/75R15	1994 - 2019	95 ft-lbs
	PILOT	LX/EX / SUV	2003 - 2008	80 ft-lbs
	PILOT	17"BASE / LX/EX/EX-L	2009 - 2015	90 ft-lbs
	PILOT	18"BASE / LX/EX/EX-L	2016 - 2019	95 ft-lbs
	PRELUDE	ALL / BASE/SI	1985 - 2001	80 ft-lbs
	RIDGELINE	ALL / RTS/RTL	2006 - 2019	95 ft-lbs
	S2000	2 DOOR / CONVERTBLE	2000 - 2009	80 ft-lbs

Always check your Honda Owner's Manual for the most accurate information for the lug nut torque for your vehicle!